Alternativ
Fitting Left

If you need to rotate or orientate the fittings you can do this yourself: you simply grip the end of the hose and rotate the fitting in its seat to the angle you need.

Unless otherwise stated, all our threaded fittings use a dual seat and can be fitted to both concave and convex applications.

M10 is the most common banjo fitting. M8, M11 and M12 are less common, so please check before ordering.

Fitting Left - Angle

If you choose a fixed fitting, we can only supply these straight.

Fitting Right

If you need to rotate or orientate the fittings you can do this yourself: you simply grip the end of the hose and rotate the fitting in its seat to the angle you need.

Unless otherwise stated, all our threaded fittings use a dual seat and can be fitted to both concave and convex applications.

M10 is the most common banjo fitting. M8, M11 and M12 are less common, so please check before ordering.

Fitting Right - Angle

If you choose a fixed fitting, we can only supply these straight.

Heatshrink

If you want it, we can put a black heatshrink over the ends of the line.

  • No
  • Yes
Colour

Choose the colour of the protective PVC coating over the braided hose.

  • Transparent / Clear
  • Carbon Fibre Look
  • Black
  • White
  • Transparent Red
  • Red
  • Orange
  • Yellow
  • Green
  • Transparent Blue
  • Blue
  • Transparent Purple
  • Pink
Support One

These are optional and move freely on the line.

  • Single Bolt
  • Double Bolt
  • Circlip Small
  • Circlip Large
  • Rubber Doughnut Grommet
  • Rubber Grommet
Support Two

These are optional and move freely on the line.

  • Single Bolt
  • Double Bolt
  • Circlip Small
  • Circlip Large
  • Rubber Doughnut Grommet
  • Rubber Grommet
Length

As you can see from the line diagram, the length is measured from the end of the fittings, except for banjo fittings which are measured from the center of the banjo hole.

Notes

If you have any special requirements, please let us know.

If you're doing a caliper conversion, please let us know which vehicle and calipers you're using so we can double check the fittings for you.

* Obligatoriska fält

Custom Brake Hose

395,00 kr exc. moms: 395,00 kr
LENGTH -
Specifications
Beskrivning
Specifikationer
Certifiering

Beskrivning

You can now create your own custom brake and clutch lines, individually tailored to your exact specifications.

We assemble each custom hose using non-rusting stainless steel fittings, crimped directly to high performance stainless steel braided hose which is wrapped in a protective wipe clean PVC cover.

Banjo bolts and accessories are sold separately.

Specifikationer

Innermaterial Slang PTFE
Yttermaterial Slang 303/304 Rostfritt stål med skyddande PVC hölje
Material kopplingar 303/304 Rostfritt Stål
Temperaturskala -70°C till 260°C
Innerdiameter 3.5mm
Ytterdiameter 7.5mm
Maximalt arbetstryck 290 BAR
Sprängtryck 870 BAR
Minsta böjradie 38mm

Certifiering

ABE KBA Tyskland, Österrike, Schweiz Se certifikat
TÜV Tyskland Se certifikat
Dekra Tyskland Se certifikat
DOT USA Se certifikat
FMVSS-106 I Världen Se certifikat
SAE I Världen Se certifikat
ADR Australien Besök hemsida
NHTSA I Världen Besök hemsida
Israel MoT Israel Besök hemsida
NZTA Nya Zeeland Besök hemsida